11 00 Engine in general N54 B30
WARNING: This page is about a different variant/trim than selected.
ENGINE IN GENERAL SPECIFICATIONS
| Cylinder | 6 | |
| Bore | mm | 84 |
| Stroke | mm | 89.6 |
| Effective displacement | cm3 | 2979 |
| Compression ratio | :1 | 10.2 |
| Max. permissible engine speed | rpm | 7000 |
| Permissible constant speed | rpm | 6550 |
| Compression pressure: Minimum and maximum values depending on position of Valvetronic. |
14...16 | |
| Compression pressure: Maximum deviation of all cylinders to each other. |
bar | 2 |