11 21 Crankshaft and Bearings N54 B30
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATIONS
| Ground sizes of main bearing journals | main bearing journal | |
|---|---|---|
| Original (designation S1) | mm | 55.998...55.993 |
| Original (designation S2) | mm | 55.992...55.987 |
| Original (designation S3) | mm | 55.986...55.981 |
| Crankshaft bearing clearance, radial | mm | 0.020...0.046 |
| Max. permitted runout at center crankshaft journal | mm | 0.15 |
CRANKSHAFT AND BEARINGS SPECIFICATIONS
| Ground sizes of main bearing journals | Guide bearing journal | |
|---|---|---|
| Original (designation S1) | mm | 64.998...64.993 |
| Original (designation S2) | mm | 64.992...64.987 |
| Original (designation S3) | mm | 64.986...64.981 |
| Crankshaft bearing clearance, radial | mm | 0.020...0.046 |
| Max. permitted runout at center crankshaft journal | mm | 0.15 |