Puller MW

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball-bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

1 = 0491537 Claw

NOTE: (Claw for Rillex 6206 (9 x))

Fig 1: Identifying Puller (23-2000)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0491538 Holding sleeve

NOTE: (Union sleeve)

3 = 0491539 Spindle

NOTE: (pressure spindle)