28 60 Control unit, mechatronics, hydraulics
WARNING: This page is about a different variant/trim than selected.
Mechatronics control unit
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hydraulic cover to transmission | GS7D36SG | M6 | 10 Nm | |
| 2AZ Mechatronics to transmission | GS7D36SG | M5x30 | Jointing torque | 3 Nm |
| Torque angle | +50 ° | |||
| M5X35 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X50 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X75 | Jointing torque | 3 Nm | ||
| Torque angle | +90 ° |