25 16 Shift Console - Automatic Transmission
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - SHIFT CONSOLE - AUTOMATIC TRANSMISSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Bowden cable to shift tower/transmission | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E81/E82/E88 | 15 Nm | ||
| 2AZ | Clamping screw on shift lever | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 10 Nm | ||
| 3AZ | Shift console to tunnel | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 7 Nm | ||
| 4AZ | Switch to shift console | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92 | 4.5 Nm | ||
| 5AZ | Interlock cable to shift tower | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86 | 7 Nm | ||
| 6AZ | Cable retaining tab to transmission | E91/E92 4WD | M8X18 | 19 Nm | |
| 7AZ | Oval-head screw for emergency release device | E60, E61 | 1.6 Nm | ||
| 8AZ | Screw for adjusting cable on transmission | E60/E61/E81/E82/E83/E84/E87/E88/E90/E91/E92/E93 | With ball head | 13 Nm | |
| 9AZ | Vulcanised support angle to transmission | E81/E82/E87/E88/E90/E91/E92/E93/E84 | M6 | 9 Nm | |