23 11 615 Replacing guide tube for clutch release unit (GS6-53BZ/DZ)

WARNING: This page is about a different variant/trim than selected.

NOTE: (transmission removed)

Necessary preliminary tasks

Release screws.

Remove guide tube (1).

Installation:

Clean thread.

Install screws with Loctite 243.

Tightening torque 23 11 2AZ .

Fig 1: Identifying Guide Tube With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.