11 22 500 Removing and installing/replacing flywheel (N54, N54T)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Enlarge special tool 11 9 260 with an elongated hole.

Enlarge elongated hole on special tool 11 9 260 to 8 mm.

Fig 1: Identifying Slot Dimension On Special Tool 11 9 260

Courtesy of BMW OF NORTH AMERICA, INC.

For vehicles with manual gearboxes

Secure flywheel with special tool 11 9 260 .

Release flywheel bolts with special tool 11 4 180 /

Tightening torque 11 22 2AZ .

Installation note:

The flywheel is secured with a dowel pin.

Fit new flywheel screws

Fig 2: Removing Flywheel Screws Using Special Tool 11 4 180

Courtesy of BMW OF NORTH AMERICA, INC.

For vehicles with automatic transmissions

Secure flywheel with special tool 11 9 260 .

Release flywheel screws with a suitable tool (1).

Tightening torque 11 22 1AZ .

Installation note:

The flywheel is secured with a dowel pin.

Fit new flywheel screws

Fig 3: Mounting Flywheel Using Special Tool 11 9 260

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.