00...... Raising vehicle with trolley jack

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Observe the following trolley-jack-related instructions:

Use only BMW-distributed/approved trolley jacks which have rubber plate contact points.
Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!
Check the rubber plate on the trolley jack prior to each use, replacing if necessary.

Fig 1: Identifying Trolley Jack

Courtesy of BMW OF NORTH AMERICA, INC.

WARNING: The vehicle may be raised with a trolley jack only at the following jacking points!

Car jacking point
Side car jacking points
Rear differential (remove heat shield: see 51 71 390 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE ON REAR AXLE )

Risk of damage: It is not permitted to raise the vehicle at the rear differential cover!

Fig 2: Identifying Vehicle Jacking Points

Courtesy of BMW OF NORTH AMERICA, INC.