00...... Notes on Using Repair Instructions, Technical Data, Tightening Torques

WARNING: This page is about a different variant/trim than selected.

These repair instructions are intended to help expertly carry out maintenance and repair work.

If there are no cross-references to tightening torques in the repair instructions, the excerpts from the company standard BMW : EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 ; M18 AND M18X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M16 AND M16X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M14 AND M14X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M12 AND M12X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M10 AND M10 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M8 AND M8 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M6 AND M7 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; or M4 AND M5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 must be observed.

Cross-references to other flat rate units are intended as an aid and can refer to a complete work operation or merely to individual work steps contained therein.