LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - Special Tools (N54)) >> 11 Engine >> 11-1380 Sleeve >> Sleeve Minimum set: Mechanical tools MW

Sleeve Minimum set: Mechanical tools MW

WARNING: This page is about a different variant/trim than selected.
NOTE: (Assembly sleeve) For fitting the valve stem seal, diameter 7 mm
Fig 1: Identifying Sleeve (11-1380)
G04745475Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals