21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 8.8 | Replace screws | 25 Nm |
| E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85/S65 | Jointing torque Torque angle |
15 Nm 25 ° |
||
| N52/N53/N52K/M47T2/N45T/N54/N46T/N43/N45K/N47/M57T2/N47S/N62TU/N57 | M8 10.9 | Jointing torque Torque angle |
15 Nm 90° ± 5° |