18 20 Exhaust system suspension
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - EXHAUST SYSTEM SUSPENSION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Clamp to front pipe holder |
N54 |
M8 |
|
19 Nm |
| 2AZ Bracket, primary cat., to primary cat. |
N54 |
M8 |
|
19 Nm |
| 3AZ Clamp to exhaust system |
N54 |
M10 |
|
45 Nm |