18 31 Exhaust pipe with catalytic converter/complete system
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - EXHAUST PIPE WITH CATALYTIC CONVERTER/COMPLETE SYSTEM
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust system to front pipe with catalytic converter | N54 | M8 | 21 Nm | |
| 2AZ Exhaust system to bracket, transmission | N54 | M8 | 19 Nm | |
| 3AZ Catalytic converter to exhaust turbocharger | N54 | M8 | Replace profile clamp and screw | 13 Nm |
| 4AZ Exhaust system to rear differential | N54 | M8 | 19 Nm | |
| 5AZ Rear muffler to body | N54 | M8 | 19 Nm |