17 21 Engine oil cooler and lines
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ENGINE OIL COOLER AND LINES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine oil cooler line to oil filter control housing | N54 | M8 x 25 | 19 Nm | |
| 2AZ Engine oil cooler line to engine oil cooler flange | N54 | M8 x 25 | 19 Nm | |
| 3AZ Engine oil cooler to bracket, engine carrier | N54 | M6 x 20 | 8 Nm |