12 42 Wires to starter
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - WIRES TO STARTER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Battery positive terminal in/on distribution box | E32/E34/E31/E36/E46/E87/E90/E85/E86/E81 | M8 | 20 Nm | |
| E39/M57 | M8 | 11 Nm | ||
| E38/M67 | M8 | 11 Nm | ||
| E46/M47TU | M8 | 11 Nm | ||
| E60/N62 | M8 | 15 Nm | ||
| E65/N62/N73 | M8 | 15 Nm | ||
| 2AZ Wiring harness on distributor | E36/M41 | M8 | 10 Nm |