LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Electrical System - Tightening Torques (N54)) >> Engine Oil Pressure, Engine Oil Temperature, Oil Condition Display >> 12 61 Engine oil pressure, engine oil temperature, oil condition display

12 61 Engine oil pressure, engine oil temperature, oil condition display

WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ENGINE OIL PRESSURE, ENGINE OIL TEMPERATURE, OIL CONDITION DISPLAY

  Type Thread Tightening specification Measure
1AZ Engine oil pressure switch/engine oil temperature sensor N52K/N54 M12x1.5    
Jointing torque 20 Nm
Torque angle 16 °
2AZ Oil condition sensor for engine oil N52K/N54 M6 Jointing torque 2 Nm 8.5 Nm


TIGHTENING TORQUE SPECIFICATION - ENGINE OIL PRESSURE, ENGINE OIL TEMPERATURE, OIL CONDITION DISPLAY

  Type Thread Tightening specification Measure
1AZ Engine oil pressure switch N54 M12x1.5 1. Tightening
2. Further angle of rotation
20 Nm
16°±2°
2AZ Oil condition sensor N54 M6   8 Nm