11 28 V-ribbed belt with Tension and Deflection Element
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ISA screw Belt tensioner with deflection pulley to engine block. |
N54 | M10 x 110 | 40 Nm | |
| 2AZ ISA screw Deflection pulley 80 x 30 |
N54 | M10 x 40 | 38 Nm | |
| 3AZ ISA screw Deflection pulley 90 x 30 |
N54 | M10 x 40 | 38 Nm | |
| 4AZ ASA screw Belt tensioner to crankcase upper section. |
N54 | M10 x 65 | 38 Nm | |
| 5AZ Deflection pulley 65 x 33 | N54 | M10 x 65 | 40 Nm | |
| 6AZ Deflection pulley 72 x 32 | N54 | M10 x 40 | 40 Nm | |
| 7AZ ISA screw Deflection pulley 73.8 x 24.92 to crankcase upper section. |
N54 | M10 x 40 | 38 Nm |