11 61 Intake manifold
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw Air intake manifold to cylinder head. |
N54 | M7 x 50 | 15 Nm | |
| 2AZ Hexagon nut Air intake manifold to cylinder head. |
N54 | AM7 | 15 Nm | |
| 3AZ Hose clamp Gaiter, rear charge-air duct to front charge-air duct. |
N54 | L65-72 | 3 Nm |