11 14 Case Covers
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission cover plate to crankcase Aluminum screws/bolts are permitted with and without color coding (blue). |
N54 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 45 ° |