23 21 Transmission Shafts 240/5/MECH Overdrive
WARNING: This page is about a different variant/trim than selected.
TRANSMISSION SHAFTS 240/5/MECH/OVERDRIVE SPECIFICATIONS
| Axial play (axial bearing clearance) of: |
|
|
| Output shaft |
mm |
0... 0.09 |
| Input shaft |
mm |
0... 0.09 |
| Layshaft |
mm |
0.1... 0.2 |
| Output spigot |
|
|
| Radial runout max |
mm |
0.07 |
| Output flange |
|
|
| Radial runout max |
mm |
0.07 |
| Axial runout max |
mm |
0.1 |