23 23 Synchronization ZF-S5-16/MECH Overdrive
WARNING: This page is about a different variant/trim than selected.
SYNCHRONIZATION ZF-S5-16/MECH/OVERDRIVE SPECIFICATIONS
| Distance between synchronizer ring and clutch body |
|
|
| New condition |
mm |
1.0... 1.3 |
| Max. wear limit size |
mm |
0.8 |
| Reverse gear |
|
|
| New condition |
mm |
0.5... 0.6 |
| Max. wear limit size |
mm |
0.4 |