17 13 020 Removing and installing/replacing expansion tank for charge air cooler (N63O1)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Risk of scalding!
Only perform this repair work after engine has cooled down.

Necessary preliminary tasks:

Remove ACOUSTIC COVER
Follow instructions for REPAIR WORK ON THE COOLING SYSTEM .

Release the coolant hoses and wiring (1) from the expansion tank and set aside.

Fig 1: Identifying Coolant Hoses And Wiring

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (3).

Tightening torque 17 10 7AZ .

Pinch off coolant hoses on the expansion tank with PINCH-OFF TOOLS (to prevent coolant from escaping).

Release coolant hoses (1) and (2) from expansion tank and detach.

Catch and dispose of escaping coolant.

Remove expansion tank.

Fig 2: Identifying Coolant Hoses And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Fill and bleed cooling system for charge air cooler. See BLEEDING COOLING SYSTEM FOR CHARGE AIR COOLER and BLEED/FILL COOLING SYSTEM FOR CHARGE AIR COOLER WITH VACUUM FILLING UNIT .

Check cooling system for charge air cooler for leaks.