61 13... Control unit plugs, 25-, 35-, 55-, 83-, 88-pin

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

Release screws (1).

Lever out pin sensor (2) with gasket (3) in direction of arrow.

Fig 1: Removing Pin Sensor

G10063972

Courtesy of BMW OF NORTH AMERICA, INC.

Remove gasket (3).

Pull out housing lock (4) in direction of arrow and unlock.

Fig 2: Pulling Out Housing Lock

G10063973

Courtesy of BMW OF NORTH AMERICA, INC.

Press down retaining hook (5) of corresponding contact and pull out cable with contact.

Special tool 61 0 312 (61 1 134) for mini flat spring contacts.

Special tool 61 0 314 (61 1 135) for mini flat spring contacts.

Fig 3: Pressing Down Retaining Hook

G10063974

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool 61 0 315 (61 1 151) for double flat spring contacts (dual retaining hooks).

Fig 4: Identifying Double Flat Spring Contacts (Dual Retaining Hooks)

G10063975

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool 61 0 323 (61 1 152) for double flat spring contacts (special retaining hook).

Fig 5: Identifying Double Flat Spring Contacts (Special Retaining Hook)

G10063976

Courtesy of BMW OF NORTH AMERICA, INC.