LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 966 (Body Equipment - Repair - F13) >> Gaskets/Seals, Loose Body Components >> 51 71 404 Removing and installing/replacing front spoiler

51 71 404 Removing and installing/replacing front spoiler

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws and remove three-part front spoiler (1).

Installation note: 

Replace faulty sheet metal nuts.

Feed front spoiler (1) correctly into bumper panel (2).

Observe tightening sequence:

  1. Front spoiler - middle - from inside outwards
  2. Front spoiler - side - from inside outwards
    Fig 1: Front Spoiler Installing Sequence
    G10062553Courtesy of BMW OF NORTH AMERICA, INC.