65 12 072 Removing and installing (replacing) amplifier (Top HiFi system Bang & Olufsen)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES on protection against electrostatic damage (ESD protection).

NOTE: Comply with notes and notes on HANDLING OPTICAL FIBRES .

Necessary preliminary work:

Clamp off NEGATIVE BATTERY CABLE .
Remove luggage compartment wheel arch panel on left. See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .

Release screw (1).

Remove amplifier (2) in direction of arrow from holder (3).

Unlock plug connections and disconnect.

Fig 1: Removing Amplifier From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Picture for example purposes.

Installation note:

Lugs (1) must be correctly slid into guide (2).

Check that amplifier (3) is securely seated.

Fig 2: Identifying Amplifier, Lugs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING AND ENCODING .