LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Heating And Air Conditioning - Repair - F12) >> Heater With Operation >> 64 11 943 Replacing evaporator temperature sensor

64 11 943 Replacing evaporator temperature sensor

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE: For purposes of clarity, picture shows heating and air-conditioning unit removed.

Disconnect plug connection (1) from evaporator temperature sensor.

Pull evaporator temperature sensor with flat-nose pliers out of heating and air-conditioning unit housing (1).

Fig 1: Identifying Evaporator Temperature Sensor Plug Connection
G06886240Courtesy of BMW OF NORTH AMERICA, INC.