31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M16 | Replace collar bolt and spring. | |
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||