31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabilizer to front axle carrier/steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 105 ° | ||||
| F03 | M12 | Replace screw. | |||
| Jointing torque | 100 Nm | ||||
| F03 | M14 | Replace screw. | |||
| Jointing torque | 165 Nm | ||||
| F25/F26 | M10 | 56 Nm | |||
| 2AZ | Stabilizer link to stabilizer/damper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45° | ||||
| 3AZ | Anti-roll bar link to anti-roll bar | F25/F26 | M12 | Replace nut. | 100 Nm |
| 4AZ | Anti-roll bar link to damper | F25/F26 | M12 | Replace nut. | 108 Nm |