0491949 313110 Holding sleeve AM

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Replaced by: 83300493555

NOTE: (Centering sleeve set for piston rod/shock absorber) Spring tensioner 31 3 110/111 for tensioning coil springs/Replaced by 31 3 340 (0 493 555)

Consisting of:

0494440 Spring tensioner
NOTE: Replaced by 31 3 340 (0 493 555)
0494441 Holding sleeve
NOTE: (Centering sleeve) Replaced by 31 3 340 (0 493 555)
0494442 Holding sleeve
NOTE: (Centering sleeve) Internal thread M18x1.5 Replaced by 31 3 340 (0 493 555)
0494443 Holding sleeve
NOTE: (Centering sleeve) Internal thread M10x1 Replaced by 31 3 340 (0 493 555)
0494444 Holding sleeve
NOTE: (Centering sleeve) Internal thread M12x1.5 Replaced by 31 3 340 (0 493 555)

Fig 1: Identifying Holding Sleeve (0491949)
Courtesy of BMW OF NORTH AMERICA, INC.