61 35 095 Removing and installing control unit/module for seat heating (rear seat)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks

REMOVE AND INSTALL REAR SEAT .

Disconnect plug connection (1).

Unclip clip (2) and remove control unit for seat heating (3).

Fig 1: Identifying Control Unit For Seat Heating, Plug Connection And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure mount (1) and retaining lugs (3) of control unit for seat heating (2) are correctly seated.

Fig 2: Identifying Control Unit For Seat Heating, Retaining Lugs And Mount

Courtesy of BMW OF NORTH AMERICA, INC.