22 11 110 Replacing left engine support arm (N52K)
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Secure engine in INSTALLATION POSITION
- Remove underbody protection at front and rear
Release grounding strap (1) from engine support arm.
Unfasten screws (2).
Remove engine support arm.
Installation:
Aluminum screws/bolts must be replaced.
Tightening torque 22 11 3AZ