24 00 Transmission in general
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine | ||||
| 6 Kant Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M8 | 24 Nm | ||
| 6 Kant Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M10 | 45 Nm | ||
| 6 Kant Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M12 | 82 Nm | ||
| Torx-Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R | M8 | 21 Nm | ||
| Torx-Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R | M10 | 42 Nm | ||
| Torx-Schrauben | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R | M12 | 72 Nm | ||
| Torx-Schrauben | GA6HP19Z/GA6HP26Z | M6 | 9 Nm | ||
| Torx-Schrauben | GA6HP26Z | M10 | 38 Nm | ||
| Torx-Schrauben Stahl | GA6HP19Z/GA6L26Z/GA6L45R | M8 | 19 Nm | ||
| Torx-Schrauben Stahl | GA6HP19Z/GA6HP26Z/GA6L45R | M12 | 66 Nm | ||
| 2AZ | Transmission to engine N51/N52/N52K/N53/N54/N55 Aluminum screws are not magnetic | GA6HP19Z/GA6HP26Z/GA6L45R | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z/GA6L45R | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110 ° | ||||
| GA6HP19Z | M10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200 ° | ||||
| GA6HP19Z/GA6L45R | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° | ||||
| 3AZ | Reinforcement shell to transmission/extension | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M8 | 23 Nm | |
| 4AZ | Cover plate for transmission | GA6HP19Z/GA6L45R | M6 | 9 Nm | |
| 5AZ | Heat shield, oil sump | GA6L45R | M6 | 8 Nm | |
| 6AZ | Air duct plate | GA6HP26Z | M6 | 10 Nm | |
| 7AZ | Line cover plate | GA6HP26Z | M6 | 10 Nm | |