24 13 Transmission Extension, Bearings, Seals
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Slotted nut/output flange | A5S 310Z/A5S 440Z/A5S 560Z/A5S 325Z | 120 Nm | ||
| 2AZ | Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange | 80 Nm | |
| GA6HP19Z/GA6HP26Z | from 09/02 with sealing ring in output flange | 60 Nm | |||
| 3AZ | Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm | |