24 30 Hydraulic/electric control parts and controlling elements
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Valve body to transmission | 3HP-22 | M6 | 11 Nm | |
| 4HP-22/4HP-24/A5S 310Z/A5S 440Z/A5S 300J/A5S 325Z/GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 8 Nm | |||
| GA6HP19Z TU/GA6HP26TU | M6 | 10 Nm | |||
| A4S 270R/A4S 310R | 5/16 inch | 20 Nm | |||
| A5S 360R/A4S 360R | M6 | 11 Nm | |||
| A5S 560Z | M6 x 12 | 6 Nm | |||
| A5S 560Z | M6 x 55 | 8 Nm | |||
| GA6L45R | M5 | 8 Nm | |||
| 2AZ | Valve housing to valve body | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 310Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 5 Nm | |
| 3AZ | Intermediate plate on shift unit | A4S 270R/A4S 310 | 13 Nm | ||
| 4AZ | Input- and output speed sensors to mechatronics | M6 | 12 Nm | ||