23 11 608 Replacing guide tube for clutch release unit (GS6-17BG/DG)
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove TRANSMISSION
- Remove CLUTCH CONTROLLER and release lever from guide tube.
Release screws.
Remove guide tube.
Tightening torque 23 11 2AZ .
Installation:
Replace bolts.
Clean new guide tube.
Guide surface must be clean (no labels/stickers or residual adhesive, etc.).