23... Universal BMW transmission take-up
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The universal transmission bracket is introduced for the E60 AWD
- Suitable for manual and automatic transmissions
IMPORTANT:
Front and rear supports (1) can be laterally adjusted by means of screws (2).
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.
Supporting transmission
Support transmission with special tools 23 4 050, 00 2 030.
IMPORTANT:
Transmission must be secured with tensioning strap (1).