LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Exhaust System - Tightening Torques (N52)) >> Oil Cooler Pipes >> 17 22 Oil Cooler Pipes

17 22 Oil Cooler Pipes

WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL COOLER PIPES

  Type Thread Tightening specification Measure
1AZ Transmission oil cooler line to transmission N52K M8x28   20 Nm
2AZ Transmission oil cooler line to oil sump N52K M6   10 Nm
3AZ Transmission oil cooler line to transmission sump N52K M6x35   8 Nm
4AZ Transmission oil cooler line to transmission oil-water heat exchanger N52K M6x35   8 Nm
5AZ Engine oil cooler lines to oil module/engine oil cooler N52K M8   20 Nm