12 42 Wires to starter
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - WIRES TO STARTER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Battery positive terminal in/on distribution box | E32/E34/E31/E36/E46/E87/E90/E85/E86/E81 | M8 | 20 Nm | |
| E39/M57 | M8 | 11 Nm | |||
| E38/M67 | M8 | 11 Nm | |||
| E46/M47TU | M8 | 11 Nm | |||
| E60/N62 | M8 | 15 Nm | |||
| E65/N62/N73 | M8 | 15 Nm | |||
| 2AZ | Wiring harness on distributor | E36/M41 | M8 | 10 Nm | |