11 62 Exhaust manifold
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - EXHAUST MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to cylinder head Coat screw connections with CRC copper paste |
All | M6 | Replace nuts | 10 Nm |
| M50/M52/M52TU/M54/M56/S52/S50 US | M7 | Replace nuts | 20 Nm | ||
| All/others | M7 | Replace nuts | 15 Nm | ||
| M10 | M8 | Upper row of staybolts installed with bolt cement | 23 Nm | ||
| M21 | M8 | 12 Nm | |||
| Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn |
12 Nm | ||||
| M41/M47/M47TU/M51/M57/M57TU | M8 | Replace nuts | 20 Nm | ||
| All/others | M8 | Replace nuts | 23 Nm | ||