Height Adjustment At Retaining Hooks
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
Adjust height by turning nut (1).
Height adjustment of engine hood/bonnet to side panel by means of STOP BUFFERS .
NOTE:
The engine hood/bonnet is correctly adjusted in the front area by a combination of pulling the arrester hooks and pressing the stop buffers.
Incorrect adjustment results in either wobbling of the engine hood/bonnet or sluggish unlocking.
Incorrect adjustment results in either wobbling of the engine hood/bonnet or sluggish unlocking.
IMPORTANT:
Check function of arrester hook.