LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Collision - Body Panel Repair (F01, F02)) >> Body Repair General Information >> 41 00... Opening Weld Joints >> 2. Opening MAG Weld Seams And MIG Brazing Seams >> Procedure

2. Opening MAG Weld Seams And MIG Brazing Seams: Procedure

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Grind off weld seams with a belt or angle grinder. Do not grind the base material thin.

Use a chisel to separate the sheet metal flange and remove the component.

scientia non olet · About LEMON Manuals