3.2 Bonding in conjunction with rivets

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the blind rivet wrench comes in as little contact with the adhesive as possible.
There is a risk of damaging the exchangeable head of the rivet wrench due to emerged adhesive.
The standard punch rivets are always replaced by blind rivets in conjunction with bonding.
The required strength of the connection is only achieved through a combination of bonding and riveting.