11 00 Mounting Engine On Assembly Stand (N63)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

WARNING:

Remove engine with hoist and special tool 11 0 020 .

Fit special tool 11 8 930 on engine.

Engine weighs approx. 280 kg.

Necessary preliminary tasks:

- Remove engine. See 11 00 050 REMOVING AND INSTALLING/REPLACING ENGINE (N63) .

- Clean contact surfaces.

Use special tool 11 8 931 to mount special tool 11 8 932 .

Insert screws (1 and 2).

Tightening torque: 11 11 9AZ to 11 11 10AZ .

Fig 1: Identifying Special Tool And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 11 8 931 to mount engine on special tool 00 2 300 .

Tightening torque: 11 11 10AZ

NOTE:

Illustration shows engine N63.

Fig 2: Mounting Engine On Assembly Stand

Courtesy of BMW OF NORTH AMERICA, INC.