LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Functional Description - F10 - Engine Performance) >> Engine Performance - Functional Description >> Selective catalytic reduction (SCR) >> Notes for Service department >> Start-up after renewal of parts

Start-up after renewal of parts

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

Renewing the SCR control unit: 

After renewal, the correct data record must be programmed into the SCR control unit.

Renewing the active tank: 

Use the diagnosis to reset the initial filling and start the initial filling routine. Reset the tank capacity calculation.

Renewing the passive tank: 

Reset the tank capacity calculation.

Renewing the SCR delivery module: 

Reset the adaptation values