11 37 Variable valve gear
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE VALVE GEAR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Slide block to cylinder head. | N55 | M6x23 | 10 Nm | |
| 2AZ Torsion spring (throttle return spring) to cylinder head. | N55 | M6x20 | 10 Nm | |
| 3AZ Electrical servomotor to cylinder head. | N55 | M6x16 | 10 Nm | |
| 4AZ Oil spray nozzle to guide block. | N55 | M6x30 | 10 Nm | |
| 5AZ Stop screw of eccentric shaft to cylinder head. | N55 | M6 | 10 Nm | |
| 6AZ Valvetronic sensor to holder. | N55 | M6x20 | 8 Nm | |
| 7AZ Holder for Valvetronic sensor. | N55 | M6x20 | 8 Nm |