11 36 Variable Camshaft Control
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N55 | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N55 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N55 | M6x12 | 9 Nm |