11 41 Oil pump with strainer and motor
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake pipe with oil deflector to crankcase lower section (bedplate) | N55 | M6x30 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Oil pump to bedplate | N55 | M8x123 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 10 Nm | |||
| Angle of rotation | 180 ° | |||
| N55 | M8x31 M8x37 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
||
| Jointing torque | 10 Nm | |||
| Angle of rotation | 90 ° | |||
| 3AZ Chain module to crankcase and oil pump | N55 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Angle of rotation | 45 ° | |||
| 4AZ Hydraulic valve of oil pump to crankcase | N55 | M6x16 | Jointing torque | 4 Nm |
| Angle of rotation | 45 ° | |||
| 5AZ Sprocket to oil pump | N55 | M8 | Jointing torque | 20 Nm |
| Angle of rotation | 45 ° | |||
| 6AZ Triangular drive to oil pump | N55 | M6x16 | Jointing torque | 4 Nm |
| Angle of rotation | 45 ° | |||
| 7AZ Chain tensioner to crankcase | N55 | M6x16 | 10 Nm |