119510 Device AM

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For mounting the radial shaft seal of the crankshaft, front.

Consisting of:

1= 0495472 Basic body

2= 0495473 Screw

NOTE: (screws (2 x))

3= 0495474 Holding sleeve

NOTE: (Sliding sleeve)

4= 0495475 Holding sleeve

NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.

5= 0495476 Nut

NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909.