SI number

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 20 06 (299)

Fig 1: Identifying Tool Set (118560)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0495744 Holder

NOTE: (Assembly holder) Remaining inventories will be sold off followed by discontinuation - then longer available individually. Available in complete special tool set 83 30 0 495 743 - 11 8 560 only.

2 = 0495745 Pliers

NOTE: (Assembly pliers) Remaining inventories will be sold off followed by discontinuation - then longer available individually.

Available in complete special tool set 83 30 0 495 743 - 11 8 560 only.

3 = 0495746 Mandrel

NOTE: (Assembly mandrel) Remaining inventories will be sold off followed by discontinuation - then longer available individually. Available in complete special tool set 83 30 0 495 743 - 11 8 560 only.

4 = 0496658 Mandrel

NOTE: For installing circlip on gudgeon pin (N55).