12 00 Removing and installing/replacing ignition coil cover (N55)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Pull ignition coil cover (1) off of rubber mounts and remove in direction of travel.

Release engine oil cooler lines from ignition coil cover if necessary.

Fig 1: Removing Ignition Coil Cover

Courtesy of BMW OF NORTH AMERICA, INC.